Any Full Tilt Mods Yet? (1 included)

[willw9]

[ QUOTE ]
[ QUOTE ]
Is it possible to just email around your modded card file?

[/ QUOTE ]

Pointless b/c everyone uses different mods. This is the best solution for now, as you can still use whatever mod you want.

[/ QUOTE ]

Can I just use your mod? I'm not all that picky...

[Roma Norgy]

[ QUOTE ]
Temporary solution for card and chip mods for the latest FT update:

Stretching/skewing your modded cards and chips in MS Paint.

Rename your modded card file to cards3.png, and your chips file to chips3.png. Stretch/skew to the following percentages and save as seperate files...

cards0.png - 60% (420x252)
cards1.png - 72% (504x300)
cards2.png - 84% (588x354)
cards3.png - 100% (700x420)
cards4.png - 120% (840x504)
cards5.png - 140% (980x588)
cards6.png - 160% (1176x708)
cardsmall.png - 58% (407x259)

chips0.png - 58% (70x33)
chips1.png - 71% (85x39)
chips2.png - 83% (100x48)
chips3.png - 100% (120x57)
chips4.png - 121% (145x69)
chips5.png - 142% (170x81)
chips6.png - 167% (200x96)

Some of the percentages are a bit off, just make sure the dimensions match those in the parentheses.

Basically, keep stretching/skewing the picture until you get the correct dimensions. Don't try to do it manually, use the Stretch/Skew feature in the Image menu.

I'm having some transparency issues with the chips when the table is sized smaller than the default size, as well as problems with the cards getting cut off on the edges a bit.

[/ QUOTE ]

If anyone plays with 9 tables on one 1600x1200 monitor, I find that modifying the card size to 70% and then naming it Cards0.png shows the cards without overlap and much more visible.

[burkie_45]

how do u modify card size? i only know how to save the cards

[Roma Norgy]

right click on the pic, hit edit, it opens up in paint, hit Ctrl+W and select whatever percent, then save it as the correlating name.

[burkie_45]

ok thank you for that, the problem im having now is that i keep my window the smallest possible b/c i 9 table but the cards are all way too big any ideas?

[Roma Norgy]

[ QUOTE ]
ok thank you for that, the problem im having now is that i keep my window the smallest possible b/c i 9 table but the cards are all way too big any ideas?

[/ QUOTE ]

what resolution is your monitor? or tell me how many inches and wide screen or not.

EDIT: If you have a 20" 1600x1200 then open your main pic, stretch/skew it to 70% and save it as Cards0.png. If you have a smaller monitor, open the main pic, stretch/skew it to 60% and save it as CardSmall.png (note these are slightly larger than recommended sizes for better visibility but they do not block anything of importance)

[burkie_45]

1280 x 800 its a laptop

[Suerte]

why is there six different card files now anyway? does it have something to do with the table resizing?

[Bavid Denyamine]

Yeah, each chip size is different in each file, Cards0.png being the smallest. I imagine the program switches image files whenever the size is > x or < y rather than resizing one image. Unfortunately this means that mods need 6 different sizes now.

[willw9]

So I just have to shrink the smallest card file to 70% of its original size?