View Single Post
  #9  
Old 04-15-2007, 11:55 AM
Acehawk74 Acehawk74 is offline
Senior Member
 
Join Date: Jun 2005
Location: Hard Rock, Tampa
Posts: 340
Default Re: No display when booting up?!

No beeps at all. I hear no audible noises other than the fans.

Here are the specs and an update:
Mobo - Gigabyte DS3 rev.3
Processor - Core 2 Duo 2.4 GHZ
PSU - Raidmax RX-630 Volcano (630 Watts)
Cooling Fan - Arctic Cooler Pro
Ram - Corsair 1 GB (2x512) DDR2 533
Vid Card - PNY Geforce 7600 PCI-e 16x
Sound Card - Chaintech 7.1 PCI Sound

I tried taking it all out, and looked at the processor to make sure it wasn't in wrong. I also ensured all cables were plugged into what were the right spots. I have a 24pin atx connector, and tried booting it with both 20 and 24 pins connected to no avail. I also tried with only 1 ram stick each boot, no luck. My next step seems to be to pull out any type of card other than the video card, and the mobo/processor/fan/ram.

The comp will turn on, no beeping, and it won't display anything on the monitor. I never see the Bios screen, or even any indication that the signal is going from the video card -> Monitor.

I've also attempted to check all ideas given in this thread (thanks for the help so far guys).

No luck [img]/images/graemlins/confused.gif[/img]

Thoughts, ideas?
Reply With Quote