Re: Feature Question
[ QUOTE ]
[ QUOTE ]
[ QUOTE ]
nanochip,
I play 1/2 NL (6-max). It doesn't matter which position I raise from (except the blinds), when I open the pot, it raises to $7. If there is 1 limper, it goes to $9. With 2 limpers, it's $11.
[/ QUOTE ]
I just played some 6max NL200 and it was working fine. It was making $8 bets when I was first to raise, or $10 if there was one limper.
Let's try a few things:
1. Try using F8 instead of RButton... see if any change.
2. Erase the hotkey (RButton) from the top box, and check the "Preset the bet window" checkbox. See if it then puts the proper bet in the bet window.
3. Change it from 4xbb to 2xbb, and see if you then get a 2xbb bet, or see if it is still a 3.5xbb bet.
4. I assume you don't have any other action assigned to RButton on any other tab of the software.
5. Change the other boxes on the street bet page from 100 to 150, so we can be sure that it is not using the 100 as you preflop amount.
Let me know the results from all 5 items, and we'll see if we can find the problem.
nano
[/ QUOTE ]
Ok, I tested it out:
1. No effect.
2. No effect.
3. No effect, it still raises pot.
4. I don't have the RButton assigned to anything else.
5. I changed all of the other boxes to 150. This caused my preflop raise to be 4.5xBB. However, if I use the RButton postflop, it causes me to overbet the pot.
[/ QUOTE ]
it seems that the software is not detecting what street you are on. This may be due to a table mod.
Try setting the debug mode to "table" on the misc tab. when you have a table open, you'll see a tooltip near the system tray, that will show a lot about your table. Check all of the variables, and let me know is anything is not showing up correctly. If the street is not correct (preflop, flop, turn, river), then either the software is not calibrated to your table (see bottom of the misc tab), or maybe your card edges are the same color as the table felt and the software can not tell the difference between the card and the felt. So my best guess is that some table mod is the problem here. Let me know what you discover.
nano
|