Re: New Software SpadeEye: Tableselection (@PP)
 

One reason I haven't purchased other software that seems similar is that I was under the impression that I could not use it to tell quickly what seat a particular fish was sitting at.

This is crucial to me, because I care much more about having good position on one fish than on the presence of two fish in irrelevant position.

Am I correct that this is a difference with this software?

Re: New Software SpadeEye: Tableselection (@PP)
 

Will be done in the next version [img]/images/graemlins/smile.gif[/img].

I think tomorrow i will release the new version even if I will not be able to add all things i wanted to add.

This week i have an important presentation, but next week I have more time to work on all your wishes...

Re: New Software SpadeEye: Tableselection (@PP)
 

anyone have any comparisons of this and sixth sense and poker table scan?

Re: New Software SpadeEye: Tableselection (@PP)
 

[ QUOTE ]
One reason I haven't purchased other software that seems similar is that I was under the impression that I could not use it to tell quickly what seat a particular fish was sitting at.

This is crucial to me, because I care much more about having good position on one fish than on the presence of two fish in irrelevant position.

Am I correct that this is a difference with this software?

[/ QUOTE ]


yes, there is a "seat" field and next to that is the player's name. there's a 7 day free trial, check it out.

Re: New Software SpadeEye: Tableselection (@PP)
 

I just installed ver 1.43, and I'm having a problem.

The tables are showing up, but data from my databases are not being displayed for table averages and no players show up in the lower part of the main screen. When I press "FullScan" it takes a minute, but all zeros are put in for the table averages.

I am using two Pokertracker-PostgreSQL databases, which show up correctly in the lower window of the options/database tab.

Any idea on what might be wrong?
Thanks, Gary

Re: New Software SpadeEye: Tableselection (@PP)
 

If the stacksize of the players is zero too, then the following is the case.
SpadeEye waits 500ms till the pokerclient software delivers the playerlist.
If this not happens, then SpadeEye moves on to the next table, and displays 0.

The reason why the pokerclient software don't show the playerlist could be, that your or their internetconnection is overloaded.

You can try to raise the value SpadeEye waits for the playerlist, by going to the options->general-tab.
Raise the value "how long to wait for playerlist". By raising this value the scanningtime will be increased...

Re: New Software SpadeEye: Tableselection (@PP)
 

When I look at some of the tables listed from the full scan only one or two players have details thus the table VPIP appears to be calculated from just that one person's own VPIP.

When I check Pokertracker I see that I do have some hands on these people but not loads. Why don't their stats show up?

Re: New Software SpadeEye: Tableselection (@PP)
 

Look in the options->profile-tab.
There you can specify the minimum amount of hands (threshold), which must be available to use a player for the calculation of table averages.

This threshold is in, to prevent distortion by players with very few hands.

Re: New Software SpadeEye: Tableselection (@PP)
 

www.spadeit.com isn't working for me... keeps timing out...

Re: New Software SpadeEye: Tableselection (@PP)
 

Seem to be problems at my host.
Hope they fix it soon.

Edit: I put up a mirror.
Now both url's should work:
www.Spadeit.com
www.SpadeEye.com

Re: New Software SpadeEye: Tableselection (@PP)
 

[ QUOTE ]
Look in the options->profile-tab.
There you can specify the minimum amount of hands (threshold), which must be available to use a player for the calculation of table averages.

This threshold is in, to prevent distortion by players with very few hands.

[/ QUOTE ]

Oh yeah thanks! I thought it would be something like that. Didn't look in Profile.

Do I need Pokertracker open when datamining or could I leave it running alone all day and then import? Would that be a bad idea?

Features I'd like: I'd like to see it open Party and login for me. I'd like a fish formula like 6th Sense. I'd like better documentation.

Re: New Software SpadeEye: Tableselection (@PP)
 

You can leave SpadeEye running alone and import the generated handhistories at a later time.
I'am doing so, too.


Opening Party and logging in would not be a problem, but hm...
I would not like to see a software doing this to my account, dunno.

I dont't know about the 6th Sense fish formula.
Can you explain it in detail and how this helps?

A better documentation is indeed needed [img]/images/graemlins/smile.gif[/img]

Re: New Software SpadeEye: Tableselection (@PP)
 

iWitness logs me into my Party account. I don't tell it my login details but my login details are stored by the Party client so all it has to do is start Party and then push the login button for me.

BTW could you get your app to obtain the autorate icons from PT? So you get a little fish or Taz icon next to players PT has rated? Not sure how useful it is but it would be cute.

Re: New Software SpadeEye: Tableselection (@PP)
 

It'd be great if you could attach a dbl click function to open tables directly from the software window. Also, if it could remember my layout that would be great as well. Oh and also a setting that will scan only specific limits would be sweet.

jrbick

Re: New Software SpadeEye: Tableselection (@PP)
 

True. Doubleclick is a nice and easy addon.
Meanwhile it is possible to join the waitinglist and browse the tablelist by the arrow- and enterkeys.
If there are no players in the waitinglist the table gets opened by pressing "enter" instead of joining the waitinglist.

To remember the layout is not that important on my todolist.
Up to now the only ability to customize the layout is given in the "options"->"display"-tab. There you can specify which columns should be displayed and which not.

The scanprocess always scans the currently selected limit within the pokerclientsoftware.
So you can select all Hold'em games to get all stakes scanned, or you can select for example $2/$4 within the pokerclient software to get only $2/$4 tables scanned.
To disctinct between Shorthanded and Fullring you can use the filter of SpadeEye or again the filter of the pokerclient software.

Re: New Software SpadeEye: Tableselection (@PP)
 

I like this product very much so far!

A couple of nice to have mods would be:
- sort the player list when you click on a table name using the last column and order selected by the user
- if I sort by seat number, it sorts alphabetically rather than numerically giving 1,10,2,3,....

G'luck all,
LVGamb00ler

Re: New Software SpadeEye: Tableselection (@PP)
 

this looks great, and I will definately be trying it later and most likely buying it.

there seems to be more and more software that actually interacts now with the party client, does anyone worry about party suddenly getting upset about this and closing accounts/seizing funds?

if they decide this is not allowed I don't care about losing the $20, I would however be worried about losing the funds in my account.

Re: New Software SpadeEye: Tableselection (@PP)
 

[ QUOTE ]
True. Doubleclick is a nice and easy addon.
Meanwhile it is possible to join the waitinglist and browse the tablelist by the arrow- and enterkeys.
If there are no players in the waitinglist the table gets opened by pressing "enter" instead of joining the waitinglist.

To remember the layout is not that important on my todolist.
Up to now the only ability to customize the layout is given in the "options"->"display"-tab. There you can specify which columns should be displayed and which not.

The scanprocess always scans the currently selected limit within the pokerclientsoftware.
So you can select all Hold'em games to get all stakes scanned, or you can select for example $2/$4 within the pokerclient software to get only $2/$4 tables scanned.
To disctinct between Shorthanded and Fullring you can use the filter of SpadeEye or again the filter of the pokerclient software.

[/ QUOTE ]

RE: Layout. Yah not a huge deal, just annoying to have to bring table VPIP to where I want it every time I open up the program.


RE: limits. I use the "favorites" option and yeah I do filters. No big deal. Just suggestions.

Great program and I thank you.


jrbick

Re: New Software SpadeEye: Tableselection (@PP)
 

For those of you who get zeros all over the place when activating the full scan (Pokeroffice):

When configuring the databases make sure you put the RIGHT dbase in there! Its not always "pokeroffice". Most of you will be using a mySQL dbases that have been given names. Go to your mySQL folder and check the exact name of the dbase you want to use. My 6max dbase was called "PPSH" which translated to "ppsh_podb". Paste it and watch the numbers grow.

[For PT it might be the same thing (obviously not mySQL, but yeah)... which is why I wrote it]

hf & gl

hra146 a.k.a holzrose (thx to Snood and his excellent support!)

Re: New Software SpadeEye: Tableselection (@PP)
 

I installed the 1.44 patch and after that the "average pot" does not show on the list (its blank for all the tables). Any ideas?

Re: New Software SpadeEye: Tableselection (@PP)
 

[ QUOTE ]
I installed the 1.44 patch and after that the "average pot" does not show on the list (its blank for all the tables). Any ideas?

[/ QUOTE ]

me too.

Re: New Software SpadeEye: Tableselection (@PP)
 

Must be some minor bug.

Currently I am at work. I will fix it in about 6 hours.

Re: New Software SpadeEye: Tableselection (@PP)
 

I can't add my pokeroffice db, help?

Re: New Software SpadeEye: Tableselection (@PP)
 

If you cannot add your Pokeroffice database, this might have two reasons.

First: The MySQL Server is not running.
To fix this, just run Pokeroffice.
Pokeroffice will start the server.

Second and mostlikely: You did not enter the correct name of the database.
The names Pokeroffice displays in his userinterface are not always the real names of the databases.
To retrieve the real name of your database go to your MySQL folder (not Pokeroffice). There you can find a subfolder named "data". All subfolders in this folder are the real names of your databases. Try to use this names or try to use this names + "_podb".

Feel free to email me at Support@Spadeit.com so i can help you step by step in detail.

Re: New Software SpadeEye: Tableselection (@PP)
 

Hi Snood, 2 questions:

1, after using spadeeye for about 3 or 4 hours, the "Full Scan" feature starts going WAY slower, like 4 or 5 times slower, than when it first starts up. Tried restarting app and that didn't work. Ideas?

2, are you on the beta right now, or do we need to pay to keep the program running past 1 week.

Thanks in advance.

Re: New Software SpadeEye: Tableselection (@PP)
 

Hi,

To 1: I have not really a clue.
Which database do you use?
Maybe your computer was just busy. Handhistory autoimport running in the background or some other job?

To 2: I am not on beta, but i am constantly trying to improve SpadeEye.
So if Trial period expires you are not able to use it further. But one can send me an email at Support@spadeit.com (including your machinecode) to request a second trial period, if you want to test some feature i might add in a future version...

Re: New Software SpadeEye: Tableselection (@PP)
 

Just purchased last night, thanks for a great product.

Quick bug: Single digit stats get sorted in with 2 digit stats. I keep getting rocks w/ 9% V$IP at the top of my V$IP sort. Hope you understand what I'm saying.

Thanks

Re: New Software SpadeEye: Tableselection (@PP)
 

[ QUOTE ]
Just purchased last night, thanks for a great product.

Quick bug: Single digit stats get sorted in with 2 digit stats. I keep getting rocks w/ 9% V$IP at the top of my V$IP sort. Hope you understand what I'm saying.

Thanks

[/ QUOTE ]


same issu here. also, where's our update with all the fun toys like advanced searching? i wanna shoot some fish in a barrel.

Re: New Software SpadeEye: Tableselection (@PP)
 

Great so far well worth the $.
A few features I would like to see....

<ul type="square">[*]Export buddy list to txt[*]Net $Won / Bottom Window (by limit if possible)[*]Export buddy list to Partypoker would be nice too[/list]

Re: New Software SpadeEye: Tableselection (@PP)
 

Next update (containing all that funny Buddylist stuff) will be available on sunday evening.

Actually the sorting sorts by ASCII value instead of real number comparison. That explains the sometimes "strange" sorting.
I'll fix it after i added the buddylist "search"/"export"/"import from database" stuff...

Re: New Software SpadeEye: Tableselection (@PP)
 

Wow - I havent even been to the site yet to check this out, but it seems everyone is really happy with it. I also must say your support seems awesome. I had just sent a PM to Juk about writing exactly what you are doing. Guess that wont be necessary. Thanks for doing the good work at a reasonable price. I will be looking into this in the near future.

Re: New Software SpadeEye: Tableselection (@PP)
 

dunno if others have this problem, but occasionally if I use the "Join" button the entire party client will close and reopen. I'm just not using the btn for now.


jrbick

Re: New Software SpadeEye: Tableselection (@PP)
 

Up to now there is only 1 other user who has problems with the "join" button, as you can read here:
http://config.elusive-forum.de/viewtopic.php?t=33

I think i have a clue on why this can happen.
I will try to fix it in the version i will release today...

Re: New Software SpadeEye: Tableselection (@PP)
 

this looks really good - and the price is right - simply cannot see paying so much money to sixth sense - seems they are askingway over TOP dollar for a product that is still in development

Has anyone runa a quick process scan on SpadeEye re security - is the general consensus that it is safe to run?

Thanks for any info

Re: New Software SpadeEye: Tableselection (@PP)
 

Has anyone compared this product to Poker Table Scan? Any differences?

Re: New Software SpadeEye: Tableselection (@PP)
 

[ QUOTE ]
Has anyone compared this product to Poker Table Scan? Any differences?

[/ QUOTE ]

I used to use PTS, now use SS. If this program would support more sites, I could drop SS.

I would say this program is marginally superior to PTS in terms of table scanning (slightly faster perhaps).

My favorite part of this program is that, when datamining, it will automatically close tables when you have a bunch of hands on more than x people at the table.

Give it a shot.

Re: New Software SpadeEye: Tableselection (@PP)
 

Hey -

My one request is that you have options (a la SS) to open, open/join, etc. when double clicking a table name. I do not like it when it just automatically puts me on the waitlist but doesn't open the table.

Re: New Software SpadeEye: Tableselection (@PP)
 

I released version 1.48 now.

Added some nice buddylist stuff to play with...

The "on doubleclick join" is now optional (Options-&gt;Display).
Something like open/join sounds nice.
I think i will add this too...

Re: New Software SpadeEye: Tableselection (@PP)
 

I'm trying out your software, and like what I see. However, I can't find v1.48 on your web site - the download page still shows 1.43.

Cheers, Carl.

Re: New Software SpadeEye: Tableselection (@PP)
 

Hoopster: thanks I might give this a try. I'm very happy with PTS and use Idleminer for data mining but the feature to close a table when I have x hands and open new ones is very intriging. Great way to find fish which is all I really care about.