Re: Help with my new 30in-- Possible $50(or more) reward :)
 

http://en.wikipedia.org/wiki/DMS-59

It looks like this will support dual-link dvi.

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

and i have the dual link dvi cable hooked up to the monitor and running great, just no better than 1280x800. hence the problem. any ideas?

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

yes, you should be able to get a cable for that that splits into two DVI-D outputs.

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

for clarification: i was previously running a monitor at 1600x1200 thru this port using the vga adapter.

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

1) Where did you go to update your video drivers? Dell or ATI's website?

2) If you go to desktop > properties > settings will it let you set the resolution to 2560x1600 but just reverts back to 1280x800 when you try to switch or will it not let you set that resolution at all?

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

1) ati's site.

2) it will not let me go any higher than 1280x800.

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

update the drivers at dell's site. you can try reverting back to your previous drivers before you do, but there's really no need.

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

I assume your system has Vista. If so, here is a direct link to the video drivers.

http://ftp.us.dell.com/video/R152786.EXE

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

Please post a pic of the DVI connector on the adapter cable - I suspect it does not support dual-link, but the card may do so.

EDIT: and the DVI cable you are using too, please.

Re: Help with my new 30in-- Possible $50(or more) reward :)
 

sorry if the quality sucks, ugh.

the yellow tagged cord is the one that came with the monitor. i currently have it attached to the splitter plug with the "1" on it (bottom in pic).

the port on the monitor says dvi-d. the other end of the cable (top in pic) is currently in there.

http://img470.imageshack.us/img470/5323/pix512rp0.jpg