Any Full Tilt Mods Yet? (1 included)

[the machine]

srsly what the [censored]. i just started using moded cards and what the hell is this crap. do we really need 6 different files to get modded cards.


DOUG FIX THIS [censored] NOW

[Jeff W]

Same thing for chips.

[willw9]

UGH^(UGH)

[toohigh]

Temporary solution for card and chip mods for the latest FT update:

Stretching/skewing your modded cards and chips in MS Paint.

Rename your modded card file to cards3.png, and your chips file to chips3.png. Stretch/skew to the following percentages and save as seperate files...

cards0.png - 60% (420x252)
cards1.png - 72% (504x300)
cards2.png - 84% (588x354)
cards3.png - 100% (700x420)
cards4.png - 120% (840x504)
cards5.png - 140% (980x588)
cards6.png - 160% (1176x708)
cardsmall.png - 58% (407x259)

chips0.png - 58% (70x33)
chips1.png - 71% (85x39)
chips2.png - 83% (100x48)
chips3.png - 100% (120x57)
chips4.png - 121% (145x69)
chips5.png - 142% (170x81)
chips6.png - 167% (200x96)

Some of the percentages are a bit off, just make sure the dimensions match those in the parentheses.

Basically, keep stretching/skewing the picture until you get the correct dimensions. Don't try to do it manually, use the Stretch/Skew feature in the Image menu.

I'm having some transparency issues with the chips when the table is sized smaller than the default size, as well as problems with the cards getting cut off on the edges a bit.

[macdaddy991]

[ QUOTE ]
Temporary solution for card and chip mods for the latest FT update:

Stretching/skewing your modded cards and chips in MS Paint.

Rename your modded card file to cards3.png, and your chips file to chips3.png. Stretch/skew to the following percentages and save as seperate files...

cards0.png - 60% (420x252)
cards1.png - 72% (504x300)
cards2.png - 84% (588x354)
cards3.png - 100% (700x420)
cards4.png - 120% (840x504)
cards5.png - 140% (980x588)
cards6.png - 160% (1176x708)
cardsmall.png - 58% (407x259)

chips0.png - 58% (70x33)
chips1.png - 71% (85x39)
chips2.png - 83% (100x48)
chips3.png - 100% (120x57)
chips4.png - 121% (145x69)
chips5.png - 142% (170x81)
chips6.png - 167% (200x96)

Some of the percentages are a bit off, just make sure the dimensions match those in the parentheses.

Basically, keep stretching/skewing the picture until you get the correct dimensions. Don't try to do it manually, use the Stretch/Skew feature in the Image menu.

I'm having some transparency issues with the chips when the table is sized smaller than the default size, as well as problems with the cards getting cut off on the edges a bit.

[/ QUOTE ]

At least for the card mods, they work fine, and my pixel count was a little off. Thank you for this, I hate the new cards.

[toohigh]

I got it working for the chips now too, just make sure you set the transparent color in InfranView BEFORE you stretch/skew the chips file. You still may have to select the transparent color for each file, but the color in between the chips will be black and easier to select.

[willw9]

Is it possible to just email around your modded card file?

[the machine]

[ QUOTE ]
Is it possible to just post your modded card file?

[/ QUOTE ]

[toohigh]

[ QUOTE ]
Is it possible to just email around your modded card file?

[/ QUOTE ]

Pointless b/c everyone uses different mods. This is the best solution for now, as you can still use whatever mod you want.

[TheNoodleMan]

I just normal cards but for them to appear larger. They are smaller than before. I just want them back to the size they were yesterday, can I get that?