![]() |
|
#11
|
|||
|
|||
|
[ QUOTE ]
pushing = folding; pushing OR folding > stop and go Stop and go will rarely fold out the higher pairs (TT-AA). It will fold out overpairs that miss the flop, which is not a good outcome for you. [/ QUOTE ] This is almost a textbook stop-n-go situation. I found this in my notes from a post Greg Raymer made a while back (sorry no link)- "If you were holding 99 in the big blind, that would've probably been the time for a stop-and-go. As was already stated, the stop-and-go play is where you are in early position, call a bet/raise, and do so with the intention of betting all-in on the next betting round. You do this because you think you have the best hand, but you also think the opponent has a good chance of getting out on you. You know if you re-raise now they will be pot-stuck and call, but if you wait for the next card(s) to be dealt, they could have enough room to fold." I also found this from Greg- "I tend to use the stop-and-go in spots where these criteria are met. First, I'm pretty sure I have the best hand now. Second, if I reraise, there is very little chance the other guy will fold... Finally, even though I can't raise enough to get him out preflop, I can bet enough on the flop that he will likely fold if he misses, even if he misses holding two overcards." Stated another way - if he has an overpair or his overcards connect on the flop you're likely getting stacked anyway, but if he has 2OCs and misses the flop you can keep him from seeing all 5 cards by pricing him out ATF. (And there's also that rare instance where you get him to fold a better hand when 2OCs to his pair hit the board.) |
| Thread Tools | |
| Display Modes | |
|
|