TableNavigator

[Grey]

Okay I just tried out the new version because the old one wasn't betpot compatible apparently (kept making FT crash when I ran the two together).

Now with the new one, it doesn't do anything whatsoever. Doesn't even show the attention bar on any of the tables when I start it up. When I try to navigate from table to table (hoping that the attention bar will show up on one of them) whenever I push up or left on my directional joystick I get this:



When I push down or right it does nothing. No other buttons do anything.

I'm trying it with FT, and I have the latest ahk.

Any help? I'm kind of screwed now because I deleted the old TN which worked.

[Grey]

n/m

[Grey]

Okay whatever got changed with the directional moving between tables it's a thousand times worse. I used to be able to have tons of tables overlapping, and move between them in a very predictable and easy way. Now, often I can't move to the table to the right by pressing the right button. I have to go up, right, and down to get to it. Often my path to a nearby table is much more convoluted than even that. I've heard of other people having this problem as well in instant message conversations.

[suitsme]

Hello,
I am using Betpot v0.2m and table navigator. Everything works fine. Tnx for that already.
What I want to do now is to assign the mouse buttons for bet pot to keyboard hotkeys so that I can do everything with my keyboard.
How can I do this? (e.g. replacing everything the middle mouse button does in Betpot to the page down button. Is it easy to explain? I hope so...

[Roland]

[ QUOTE ]
Okay whatever got changed with the directional moving between tables it's a thousand times worse. I used to be able to have tons of tables overlapping, and move between them in a very predictable and easy way. Now, often I can't move to the table to the right by pressing the right button. I have to go up, right, and down to get to it. Often my path to a nearby table is much more convoluted than even that. I've heard of other people having this problem as well in instant message conversations.

[/ QUOTE ]

Odd. I thought the new method would work with any kind of semi-sane table arrangement. Could you maybe post a screen shot of your setup?

[Roland]

[ QUOTE ]
Hello,
I am using Betpot v0.2m and table navigator. Everything works fine. Tnx for that already.
What I want to do now is to assign the mouse buttons for bet pot to keyboard hotkeys so that I can do everything with my keyboard.
How can I do this? (e.g. replacing everything the middle mouse button does in Betpot to the page down button. Is it easy to explain? I hope so...

[/ QUOTE ]

I think this is probably explained somewhere in the BetPot documentation.

[Subman]

I have combed through this entire thread but cannot come up with a solution.

I am trying to multitable Full Tilt using TableNavigator. I have a 17 inch monitor, so my 4 tables overlap. I wish to use AttentionQueue (AQ) navigation and have Auto-suspend, Flash and Activate target all checked. However, this setup does not seem to consistently work, with tables not activating when they should.

I believe I read that the overlapping tables should present no difficulties when trying to implement my setup. Is anyone successfully using AQ at Full Tilt with overlapping tables?

[Disconnected]

[ QUOTE ]
I have combed through this entire thread but cannot come up with a solution.

I am trying to multitable Full Tilt using TableNavigator. I have a 17 inch monitor, so my 4 tables overlap. I wish to use AttentionQueue (AQ) navigation and have Auto-suspend, Flash and Activate target all checked. However, this setup does not seem to consistently work, with tables not activating when they should.

I believe I read that the overlapping tables should present no difficulties when trying to implement my setup. Is anyone successfully using AQ at Full Tilt with overlapping tables?

[/ QUOTE ]

For me, AQ navigation doesn't work using Frame, but it does kind of work if I use Bar for the indicator. Not sure why this is so.

When I say kind of work, what I mean is that the table won't get activated without the middle button available (like what happens when check or raise are your only options -- limped pot w/you in the BB, or first to act postflop). In that case, TN misses the table. I'm guessing that behavior is because in the FullTilt.ahk script, it's looking for an older button number in the IsTableWaiting method (it should use FTCButton11 -- I remember when BetPot didn't work after a FullTilt upgrade, that was the issue). This behavior doesn't bother me a ton, so I haven't tried out a fix, but maybe I will tonight when I get home from work, unless someone else jumps in to confirm or deny.

[Subman]

Thanks for your reply, Disconnected. I tried Bar instead of Frame and also used FTCButton11, all to no avail.

I am prepared to pay for a working script. Please PM me.

[Disconnected]

Sorry it didn't work for you. I did change the button to FTCButton11, and that did the trick for me...now it picks up all the tables. Wish I could help you, but I've hit the limit of my AHK depth [img]/images/graemlins/blush.gif[/img]. I would guess that for someone to help you, you might try providing your OS and display properties, as well as confirm you're using the latest TN script from the Wiki. Good luck.

Also, to fix my post above where I said that Frame wasn't activating the table the same way Bar does.... I think that it may activate it as far as Windows goes, but for some reason BetPot doesn't pick up the active table in Frame mode, but does in Bar mode.

One of the things that the StarsUrgentTable script does on Stars is to put your mouse in the active window. It would be really cool if TN could do that as well, since for some reason that seems to be a better indicator to me than either frames or bars...not sure why. I looked at the code that does it in StarsUrgentTable, but am not confident enough to try porting it to TN.