Full Tilt Data Mining?
 

Hey everyone!

Can anyone please desribe how to data mine on full tilt? I tried few things but it didnt work. Is there a mining software like for party?

Thanks in advance

Re: Full Tilt Data Mining?
 

Yes...if you pay me $50 I'll set you all up.

Re: Full Tilt Data Mining?
 

I switched to Full Tilt the other day as well, and it took me about 2 seconds to figure it out. The process:

Open tables, have PT auto-import hands. Done.

I'll take a $49 "donation" now.

Re: Full Tilt Data Mining?
 

this should really be in the FAQ ...

Re: Full Tilt Data Mining?
 

I did try that but it doesnt import for some reason only the ones where im sitting at the table

Re: Full Tilt Data Mining?
 

are u using the auto import for full tilt in PT? also check to see if 'dont import observed hands right now' is unchecked.

Re: Full Tilt Data Mining?
 

thanks guys, its working now

Re: Full Tilt Data Mining?
 

[ QUOTE ]
thanks guys, its working now

[/ QUOTE ]
Do you owe Charlie $50?

Re: Full Tilt Data Mining?
 

im confused too I can't import observed hands...?

Re: Full Tilt Data Mining?
 

It's just like DMoogle says. Open tables and auto import.

Just make sure that you're writing all the hand histories to the hard drive.

Re: Full Tilt Data Mining?
 

The latest version of SpadeEye (www.spadeit.com) is now able to open and close tables automatically on FullTilt for datamining purposes.

Currently the support is a bit rudimental.
Use the table filter within FullTiltPoker to limit the tablelist and therefore define which tables will be opened/closed.
Currently one can specify to open/close tables with a specific number of players at the table.

Make sure you try this with latest version 1.60.

Re: Full Tilt Data Mining?
 

nm

Re: Full Tilt Data Mining?
 

[ QUOTE ]
The latest version of SpadeEye (www.spadeit.com) is now able to open and close tables automatically on FullTilt for datamining purposes.

Currently the support is a bit rudimental.
Use the table filter within FullTiltPoker to limit the tablelist and therefore define which tables will be opened/closed.
Currently one can specify to open/close tables with a specific number of players at the table.

Make sure you try this with latest version 1.60.

[/ QUOTE ]

AND I QUOTE FROM YOUR WEBSITE. WTF??

Bei uns bekommen Sie die neue Top-Level-Domain .EU bereits für unschlagbare 16,00 Euro pro Jahr! Informieren Sie sich hier über die geltenden Richtlinien und bestellen Sie gleich.

Re: Full Tilt Data Mining?
 

Can you setup PAHUD to show stats on the observed tables?

Re: Full Tilt Data Mining?
 

[ QUOTE ]
[ QUOTE ]
The latest version of SpadeEye (www.spadeit.com) is now able to open and close tables automatically on FullTilt for datamining purposes.

Currently the support is a bit rudimental.
Use the table filter within FullTiltPoker to limit the tablelist and therefore define which tables will be opened/closed.
Currently one can specify to open/close tables with a specific number of players at the table.

Make sure you try this with latest version 1.60.

[/ QUOTE ]

AND I QUOTE FROM YOUR WEBSITE. WTF??

Bei uns bekommen Sie die neue Top-Level-Domain .EU bereits für unschlagbare 16,00 Euro pro Jahr! Informieren Sie sich hier über die geltenden Richtlinien und bestellen Sie gleich.

[/ QUOTE ]
Uesd: http://dictionary.reference.com/translate/text.html

"With us you already get the new Top level Domain EU für unbeatable 16.00 euro per year! Inform über the valid guidelines here and order yourselves you directly."

Juk [img]/images/graemlins/smile.gif[/img]

Re: Full Tilt Data Mining?
 

[ QUOTE ]
Can you setup PAHUD to show stats on the observed tables?

[/ QUOTE ]

Maybe you don't have PAHUD set up correctly for Full Tilt. Of course it'll show for all tables you have open, observing or not.

Go into Preferences, pick Full Tilt under sites, make sure you have the right hand history path, and the right DB, if, like me, you started a new DB...

Nancy

Re: Full Tilt Data Mining?
 

My question,

Is there an AHK script for Full Tilt? Frankly, Spade Eye is a whole lot more than I was looking for.

Looked into Sixth Sense in the past and it seemed fishy-table finding IS different than datamining.

Yeah, Yeah, oughta just figure out Auto Hot Keys, do some basic and try to translate IWitness. Just don't want to try to learn AHK if someone else already tweaked IWitness for Full Tilt.

Also, kinda hate to pay for a hand grabber for Stars when I can't be sure how long they'll last, thus my picking FT.

Nancy

2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
My question,

Is there an AHK script for Full Tilt? Frankly, Spade Eye is a whole lot more than I was looking for.

Looked into Sixth Sense in the past and it seemed fishy-table finding IS different than datamining.

Yeah, Yeah, oughta just figure out Auto Hot Keys, do some basic and try to translate IWitness. Just don't want to try to learn AHK if someone else already tweaked IWitness for Full Tilt.

Also, kinda hate to pay for a hand grabber for Stars when I can't be sure how long they'll last, thus my picking FT.

[/ QUOTE ]
Here is a script 2OuterJitsu sent me to host for him: http://www.jukofyork.com/FTPWatch.ahk

It should work like SafeMine for FTP (ie:work as a table opener ala iWitness). It was based off my SafeMine script (which in turn was based on Roland's iWitness V1 script), but please don't ask me about it, as I don't even have an account on FTP and therefore can't help other than hosting it.

If anybody knows what they are doing on the overcards.com Wiki, then plz plz plz can you make a page for this script and copy it onto their! [img]/images/graemlins/smile.gif[/img]

Juk [img]/images/graemlins/smile.gif[/img]

Re: 2OuterJitsu\'s FTP table opening script
 

www.overcards.com/wiki/moin.cgi/FullTiltWatch


[img]/images/graemlins/smile.gif[/img]

Re: 2OuterJitsu\'s FTP table opening script
 

When I run this I get the following error. Any ideas?

Error: Parameter #2 is not a valid ControlGet command.

Specifically: List

Line#
027: FileAppend,%A_UserName%.%A_ComputerName% is locked,%A_UserName%.%A_ComputerName%.lock
030: OnExit,ExitSub
034: SetTimer,MinimizeTables,10000
037: Gosub,OpenTables
038: SetTimer,OpenTables,190000
040: Return
049: WinGet,id,List,Limit Hold'em,,Full Tilt Poker
---> 052: ControlGet,AllTablesAvail,List,,SysListView323,ahk _id%lobby_id%

Re: 2OuterJitsu\'s FTP table opening script
 

Never mind. Downloading latest version of AHK fixes the problem.

Re: 2OuterJitsu\'s FTP table opening script
 

Thank you very much. Is there a way to have the script filter out CAP games? Also is there a way to have it change it's cycl to less then 20 minutes?

Thanks again!

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
[ QUOTE ]
My question,

Is there an AHK script for Full Tilt? Frankly, Spade Eye is a whole lot more than I was looking for.

Looked into Sixth Sense in the past and it seemed fishy-table finding IS different than datamining.

Yeah, Yeah, oughta just figure out Auto Hot Keys, do some basic and try to translate IWitness. Just don't want to try to learn AHK if someone else already tweaked IWitness for Full Tilt.

Also, kinda hate to pay for a hand grabber for Stars when I can't be sure how long they'll last, thus my picking FT.

[/ QUOTE ]
Here is a script 2OuterJitsu sent me to host for him: http://www.jukofyork.com/FTPWatch.ahk

It should work like SafeMine for FTP (ie:work as a table opener ala iWitness). It was based off my SafeMine script (which in turn was based on Roland's iWitness V1 script), but please don't ask me about it, as I don't even have an account on FTP and therefore can't help other than hosting it.

If anybody knows what they are doing on the overcards.com Wiki, then plz plz plz can you make a page for this script and copy it onto their! [img]/images/graemlins/smile.gif[/img]

Juk [img]/images/graemlins/smile.gif[/img]

[/ QUOTE ]

Awesome. Thank you sooooo much.

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
Thank you very much. Is there a way to have the script filter out CAP games? Also is there a way to have it change it's cycl to less then 20 minutes?

Thanks again!

[/ QUOTE ]

It should already do this. What game/type limits have you filtered for?

Re: 2OuterJitsu\'s FTP table opening script
 

Thanks guys, this is exactly what I've been looking for too.

Re: 2OuterJitsu\'s FTP table opening script
 

I've got PT set to autoimport from the correct directory and FT set to save HHs to the harddrive. PT won't autoimport, however, because FT is saving them as .tmp's instead of .hhf.

How is everybody getting it to save in the correct format without manually changing each one?

Re: 2OuterJitsu\'s FTP table opening script
 

I am an idiot who has always played at Party. I think I got it figured out.

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
[ QUOTE ]
My question,

Is there an AHK script for Full Tilt? Frankly, Spade Eye is a whole lot more than I was looking for.

Looked into Sixth Sense in the past and it seemed fishy-table finding IS different than datamining.

Yeah, Yeah, oughta just figure out Auto Hot Keys, do some basic and try to translate IWitness. Just don't want to try to learn AHK if someone else already tweaked IWitness for Full Tilt.

Also, kinda hate to pay for a hand grabber for Stars when I can't be sure how long they'll last, thus my picking FT.

[/ QUOTE ]
Here is a script 2OuterJitsu sent me to host for him: http://www.jukofyork.com/FTPWatch.ahk

It should work like SafeMine for FTP (ie:work as a table opener ala iWitness). It was based off my SafeMine script (which in turn was based on Roland's iWitness V1 script), but please don't ask me about it, as I don't even have an account on FTP and therefore can't help other than hosting it.

If anybody knows what they are doing on the overcards.com Wiki, then plz plz plz can you make a page for this script and copy it onto their! [img]/images/graemlins/smile.gif[/img]

Juk [img]/images/graemlins/smile.gif[/img]

[/ QUOTE ]

Is it pretty tough to get this script to only mine certain limits without FT's "custom game" selection ability?

Re: 2OuterJitsu\'s FTP table opening script
 

Yes same problem with the loss of custom with the new update. Well, it worked well for a while.

Re: 2OuterJitsu\'s FTP table opening script
 

Any chance of turning this into an Iwitness type script?

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
Any chance of turning this into an Iwitness type script?

[/ QUOTE ]

I 2nd that...

Re: 2OuterJitsu\'s FTP table opening script
 

Hi All,
I made some modifications to the script so it will only open certain types of tables. I think it works well but have not tested it thoroughly.

Anybody want to host it?

Or can I just copy it into here? Sorry I am very new to this AHK stuff.

-Mike

Re: 2OuterJitsu\'s FTP table opening script
 

Here is the modified sections of the code:

The early declarations I modified to:
[ QUOTE ]

;================================================= ===============================

; This is the number of tables you wish to mine (Full Tilt Poker allows 16 tables).
NumTablesRequired = 16 ;Change this number to define the maximum number of tables you will try to keep open.

; Change this number for the type of L/NL Limit you want to observe. (2 for Heads up, 6 for 6 max, 9 for full ring).
NumSeats = 6

;Change this number for the minimum amount of players seated you want to observe.
NumPlayers = 4

;Change this to Type of Table desired NL, Limit, or CAP NL
Limit = NL

;Change this to Stakes Desired Ex: $2/$4
Stakes = $1/$2
;================================================= ======================================

[/ QUOTE ]

I also changed the Open Tables function:
[ QUOTE ]

OpenTables:

;make a list of all the Full Tilt tables, excluding Lobby
WinGet, id, List, Limit Hold'em, , Full Tilt Poker

;make a list of all the Full Tilt tables
ControlGet, AllTablesAvail, List, , SysListView323, ahk_id%lobby_id% ;used below to close closed tables (no longer in the list box)


; Lets see if we want to close any tables.
Loop, %id%
{
StringTrimRight, Window, id%A_Index%, 0

; See if this window is open in another user area, if so lets close it.
WinGetTitle, String, ahk_id%Window%
StringSplit, StringArray, String, -
StringTrimRight, StringArray1, StringArray1, 1
if IsTableOpenInAnotherArea(StringArray1) = 1
{
WinClose, ahk_id%Window%
WinWaitClose, ahk_id%Window%, , 3
}
Else
{
IfNotInString, AllTablesAvail, %StringArray1%
{
WinClose, ahk_id%Window%
WinWaitClose, ahk_id%Window%, , 3
}
}
}

; Lets see if open tables still qualify, if not close them.
GoSub, IsTableLessNumPlayersSeated

; If we still have >= n tables open allready, lets not bother.
WinGet, NumTables, List, Limit Hold'em, , Full Tilt Poker
If (NumTables >= NumTablesRequired)
return

; Set the focus to the topmost row.
ControlFocus, SysListView323, ahk_id%lobby_id% ;set focus to the ListView
ControlGet, count, List, Count, SysListView323, ahk_id%lobby_id% ;used below to break if we reach the end of the list before we find n tables
ControlGet, focused, List, Count Focused, SysListView323, ahk_id%lobby_id% ;we want to select the topmost row,

; Send %focused%/15 amount of PGUP keystrokes to get to the top of the list.

focused /= 15

Loop, %focused%
ControlSend, SysListView323, {PgUp}, ahk_id%lobby_id%


; Open the tables.
Loop
{
; Save the index.
ListIndex = %a_index%

; loop
; {

ControlGet, Row, List, Focused, SysListView323, ahk_id%lobby_id%
StringSplit, RowArray, Row, %A_Tab% ; Fields (columns) in each row are delimited by tabs (A_Tab).
StringSplit, NumSeated, RowArray5, /
RatioSeated := NumSeated1 / NumSeated2

; ;becasue of the large number of tables there may be a lag
; ;we need to verify the list has kept up with the script

; TableName = %RowArray2%
; sleep 300

; If TableName = %RowArray2%
; break
; ListVars
; Pause
; }

IfWinNotExist %RowArray2%
{
If IsTableOpenInAnotherArea(RowArray2) = 0
{

; IfNotInString, RowArray4, CAP NL ;Had to keep this as CAP NL tables were randomly opening otherwise


If RowArray4 = %Limit%
{
if RowArray3 = %Stakes%
{

if NumSeated2 = %NumSeats%
{
; ListVars
; Pause

IfGreaterOrEqual, RatioSeated, % NumPlayers / NumSeats
{
ControlSend, SysListView323, {Enter}, ahk_id%lobby_id%
If ErrorLevel = 0
NumTables++
}

}
}
}
}
}

ControlSend, SysListView323, {DOWN}, ahk_id%lobby_id% ;move to the next table
If (NumTables >= NumTablesRequired OR ListIndex > count) ;if we reach 16 tables or the end of the list, break ;
break
}

; Sleep to make sure they open and then, update the table names.
;Sleep, 1000
GoSub, UpdateTableNames

return

;================================================= ===================================

[/ QUOTE ]

And Finally I modified the IsTableLessNumPlayersSeated function.

[ QUOTE ]
IsTableLessNumPlayersSeated:
{
; ; Set the focus to the topmost row.
ControlFocus, SysListView323, ahk_id%lobby_id% ;set focus to the ListView
ControlGet, count, List, Count, SysListView323, ahk_id%lobby_id% ;used below to break if we reach the end of the list before we find n tables
ControlGet, focused, List, Count Focused, SysListView323, ahk_id%lobby_id% ;we want to select the topmost row,

; If we have 0 tables open allready, lets not bother.
WinGet, NumTables, List, Limit Hold'em, , Full Tilt Poker
If (NumTables = 0)
return

; ; Send %focused% / 15 amount of PGUP keystrokes to get to the top of the list.

focused /= 15
Loop, %focused%
{
ControlSend, SysListView323, {PgUp}, ahk_id%lobby_id% ;move to the next table
}
Loop
{
ControlGet, Row, List, Focused, SysListView323, ahk_id%lobby_id%
StringSplit, RowArray, Row, %A_Tab% ; Fields (columns) in each row are delimited by tabs (A_Tab)

If RowArray4 = %Limit%
{
if RowArray3 = %Stakes%
{
break
}
}

ControlSend, SysListView323, {DOWN}, ahk_id%lobby_id% ;move to the next table
If (ListIndex > count) ;if we reach the end of the list, break ;
break
}
; Check NumPlayers
Loop
{

; Save the index.
ListIndex = %a_index%

ControlGet, Row, List, Focused, SysListView323, ahk_id%lobby_id%
StringSplit, RowArray, Row, %A_Tab% ; Fields (columns) in each row are delimited by tabs (A_Tab).
StringSplit, NumSeated, RowArray5, /
RatioSeated := NumSeated1 / NumSeated2

IfWinExist %RowArray2%
{
ifLess, RatioSeated, % NumPlayers / NumSeats
{
WinClose, %RowArray2%
WinWaitClose, %RowArray2%, , 3
}
}
ControlSend, SysListView323, {DOWN}, ahk_id%lobby_id% ;move to the next table
If (ListIndex > count) ;if we reach 16 tables or the end of the list, break ;
break
}

; Sleep to make sure they close and then, update the table names.
;Sleep, 1000
GoSub, UpdateTableNames

return

[/ QUOTE ]

-Mike

Re: 2OuterJitsu\'s FTP table opening script
 

used your section changes above and it opened my specified tables no problem. Still waiting to see if closes tables as well that fall out of my criterion.

EDIT: looks like it is closing tables as well. Do the hand history files disappear when the tables are closed? Or will PT get a chance to download them if I have it downloading every 1 min?

This is going to be great! Thanks gentlemen!

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
Here is the modified sections of the code:

The early declarations I modified to:
[ QUOTE ]

;================================================= ===============================

; This is the number of tables you wish to mine (Full Tilt Poker allows 16 tables).
NumTablesRequired = 16 ;Change this number to define the maximum number of tables you will try to keep open.

; Change this number for the type of L/NL Limit you want to observe. (2 for Heads up, 6 for 6 max, 9 for full ring).
NumSeats = 6

;Change this number for the minimum amount of players seated you want to observe.
NumPlayers = 4

;Change this to Type of Table desired NL, Limit, or CAP NL
Limit = NL

;Change this to Stakes Desired Ex: $2/$4
Stakes = $1/$2
;================================================= ======================================

[/ QUOTE ]
im new with this ahk script. lets say i want to do two diferent limits stakes (example 5/10LHE and 10/20LHE.Also observe all the 3 different tables types(example Hu, 6max, 9max) how would i change the script too? thanks

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
used your section changes above and it opened my specified tables no problem. Still waiting to see if closes tables as well that fall out of my criterion.

EDIT: looks like it is closing tables as well. Do the hand history files disappear when the tables are closed? Or will PT get a chance to download them if I have it downloading every 1 min?

This is going to be great! Thanks gentlemen!

[/ QUOTE ]

I didn't change the timing at all, so I believe it verifies the tables every 3 minutes or so. This should be long enough for PT at every minute.

Glad it worked!

-Mike

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
Here is the modified sections of the code:

The early declarations I modified to:
[ QUOTE ]

;================================================= ===============================

; This is the number of tables you wish to mine (Full Tilt Poker allows 16 tables).
NumTablesRequired = 16 ;Change this number to define the maximum number of tables you will try to keep open.

; Change this number for the type of L/NL Limit you want to observe. (2 for Heads up, 6 for 6 max, 9 for full ring).
NumSeats = 6

;Change this number for the minimum amount of players seated you want to observe.
NumPlayers = 4

;Change this to Type of Table desired NL, Limit, or CAP NL
Limit = NL

;Change this to Stakes Desired Ex: $2/$4
Stakes = $1/$2
;================================================= ======================================

[/ QUOTE ]
im new with this ahk script. lets say i want to do two diferent limits stakes (example 5/10LHE and 10/20LHE.Also observe all the 3 different tables types(example Hu, 6max, 9max) how would i change the script too? thanks

[/ QUOTE ]

To check all table types just remove the If statement
[ QUOTE ]

if NumSeated2 = %NumSeats%

[/ QUOTE ]


and the appropriate {}.


To do multiple Stakes is certainly possible, however I would need to become more proficient in this language to understand how. Basically Stakes would have to become an array and the line:

[ QUOTE ]

if RowArray3 = %Stakes%

[/ QUOTE ]


Would become an Or statement of all of the stakes in the array. If someone wants to figure out how to do that in this language it might be a good addition. I might be able to look into it later but not within the next couple of days.

-Mike

Re: 2OuterJitsu\'s FTP table opening script
 

the changes are fantastic

Re: 2OuterJitsu\'s FTP table opening script
 

I don't know, I'm sure I'm messing something up, but I keep getting line errors.

Can someone upload the updated file to the site?

Re: 2OuterJitsu\'s FTP table opening script
 

[ QUOTE ]
I don't know, I'm sure I'm messing something up, but I keep getting line errors.

Can someone upload the updated file to the site?

[/ QUOTE ]